Crafted in the same facility as our U.S.-made instruments, the American Performer Stratocaster Neck works well with almost any playing style. Features include our comfortable "Modern C" neck profile with a satin urethane finish that give it a smooth, fast playing feel. A large, '70's era headstock adds mass and sustain and 22 jumbo frets make it easier to achieve wide, expressive bends.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Neck Shape
    Modern "C"
  • Tuner Mounting Config
    Dual Guide Pin
  • Fingerboard Material
    Maple
  • Neck Material
    Arce
  • Nut Material
    Hueso sintético de cejuela
  • Position Inlays
    Punto negro
  • Neck Finish
    Satin Urethane
  • Truss Rod Nut
    1/8" Hex Adjustment
  • Truss Rod
    Standard
  • Fingerboard Radius
    9.5" (241 mm)
  • Scale Length
    25.5" (64.77 cm)
  • Nut Width
    1.685" (42.8 mm)
  • Number of Frets
    22
  • Fret Size
    Jumbo
  • Headstock Thickness
    .404” (10.26 mm)
  • Neck Thickness
    1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
  • Peg Hole Diameter
    .404” (10.26 mm)

Características

  • Maple neck w/ walnut stripe
  • Large '70s headstock
  • Maple fingerboard with 9.5" radius
  • 22 jumbo frets
  • Pre-slotted synthetic bone nut
  • Six two-guide-pin tuning machine holes

American Performer Strat Neck, 22 Jumbo Frets, 9.5" Radius

Nº de producto: 0994912921
405.00 €
Select Guitar Color
Color:
Select Guitar Color
Fingerboard Material:
Fingerboard Material:
MÁS EN CAMINO
Pide ahora, el stock llega el 03/10/24
EN STOCK
Disponible para enviar
Availability:
  • In Stock

Crafted in the same facility as our U.S.-made instruments, the American Performer Stratocaster Neck works well with almost any playing style. Features include our comfortable "Modern C" neck profile with a satin urethane finish that give it a smooth, fast playing feel. A large, '70's era headstock adds mass and sustain and 22 jumbo frets make it easier to achieve wide, expressive bends.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Neck Shape
    Modern "C"
  • Tuner Mounting Config
    Dual Guide Pin
  • Fingerboard Material
    Maple
  • Neck Material
    Arce
  • Nut Material
    Hueso sintético de cejuela
  • Position Inlays
    Punto negro
  • Neck Finish
    Satin Urethane
  • Truss Rod Nut
    1/8" Hex Adjustment
  • Truss Rod
    Standard
  • Fingerboard Radius
    9.5" (241 mm)
  • Scale Length
    25.5" (64.77 cm)
  • Nut Width
    1.685" (42.8 mm)
  • Number of Frets
    22
  • Fret Size
    Jumbo
  • Headstock Thickness
    .404” (10.26 mm)
  • Neck Thickness
    1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
  • Peg Hole Diameter
    .404” (10.26 mm)

Características

  • Maple neck w/ walnut stripe
  • Large '70s headstock
  • Maple fingerboard with 9.5" radius
  • 22 jumbo frets
  • Pre-slotted synthetic bone nut
  • Six two-guide-pin tuning machine holes
American Performer Strat Neck, 22 Jumbo Frets, 9.5" Radius
405.00 €
405.00 €

Equipo recomendado

Visto recientemente

 

En stock: FECHA