Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Telecaster® guitar neck features a silky satin Modern "C" shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12" radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialMaple
-
Neck MaterialMaple with Walnut Stripe
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane with Gloss Urethane Headstock Face
-
Truss Rod Nut3/16" Hex Adjustment
-
Truss RodSingle Action, Head Adjust
-
Fingerboard Radius12" (305 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.685" (42.8 mm)
-
Number of Frets22
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .870" (22.09 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Features
- Maple neck with walnut "skunk" stripe
- Maple or pau ferro fingerboard with 12" radius and 22 medium jumbo frets
- Satin urethane finish on front and back of neck with gloss headstock front
- Rolled fingerboard edges
- Pre-slotted synthetic bone nut
- Single action, head adjust
- Six two-guide-pin tuning machine holes
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Telecaster® guitar neck features a silky satin Modern "C" shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12" radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigDual Guide Pin
-
Fingerboard MaterialMaple
-
Neck MaterialMaple with Walnut Stripe
-
Nut MaterialSynthetic Bone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane with Gloss Urethane Headstock Face
-
Truss Rod Nut3/16" Hex Adjustment
-
Truss RodSingle Action, Head Adjust
-
Fingerboard Radius12" (305 mm)
-
Scale Length25.5" (64.77 cm)
-
Nut Width1.685" (42.8 mm)
-
Number of Frets22
-
Fret SizeMedium Jumbo
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .820" (20.82 mm), 12th Fret - .870" (22.09 mm)
-
Peg Hole Diameter.397" (10.08 mm)
Features
- Maple neck with walnut "skunk" stripe
- Maple or pau ferro fingerboard with 12" radius and 22 medium jumbo frets
- Satin urethane finish on front and back of neck with gloss headstock front
- Rolled fingerboard edges
- Pre-slotted synthetic bone nut
- Single action, head adjust
- Six two-guide-pin tuning machine holes