Crafted in the same facility as our U.S.-made instruments, the American Performer Telecaster Neck works well with almost any playing style. Features include our comfortable "Modern C" neck profile with a satin urethane finish that give it a smooth, fast playing feel. A large, '70's era headstock adds mass and sustain and 22 jumbo frets make it easier to achieve wide, expressive bends.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Neck Shape
    Modern "C"
  • Tuner Mounting Config
    Dual Guide Pin
  • Fingerboard Material
    Maple
  • Neck Material
    Maple
  • Nut Material
    Synthetic Bone
  • Position Inlays
    Black Dot
  • Neck Finish
    Satin Urethane
  • Truss Rod Nut
    1/8" Hex Adjustment
  • Truss Rod
    Standard
  • Fingerboard Radius
    9.5" (241 mm)
  • Scale Length
    25.5" (64.77 cm)
  • Nut Width
    1.685" (42.8 mm)
  • Number of Frets
    22
  • Fret Size
    Jumbo
  • Headstock Thickness
    .540” (13.71 mm)
  • Neck Thickness
    1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
  • Peg Hole Diameter
    .404” (10.26 mm)

Features

  • Maple neck w/ walnut stripe
  • Large '70s headstock
  • Maple fingerboard with 9.5" radius
  • 22 jumbo frets
  • Pre-slotted synthetic bone nut
  • Six two-guide-pin tuning machine holes

American Performer Tele Neck, 22 Jumbo Frets, 9.5" Radius

Model #: 0995112921
405.00 €
Select Guitar Color
Color:
Select Guitar Color
Fingerboard Material:
Fingerboard Material:
MORE ON THE WAY
Order now, expected in stock 10/06/24
In stock
Available To Ship
Availability:
  • In Stock

Crafted in the same facility as our U.S.-made instruments, the American Performer Telecaster Neck works well with almost any playing style. Features include our comfortable "Modern C" neck profile with a satin urethane finish that give it a smooth, fast playing feel. A large, '70's era headstock adds mass and sustain and 22 jumbo frets make it easier to achieve wide, expressive bends.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Neck Shape
    Modern "C"
  • Tuner Mounting Config
    Dual Guide Pin
  • Fingerboard Material
    Maple
  • Neck Material
    Maple
  • Nut Material
    Synthetic Bone
  • Position Inlays
    Black Dot
  • Neck Finish
    Satin Urethane
  • Truss Rod Nut
    1/8" Hex Adjustment
  • Truss Rod
    Standard
  • Fingerboard Radius
    9.5" (241 mm)
  • Scale Length
    25.5" (64.77 cm)
  • Nut Width
    1.685" (42.8 mm)
  • Number of Frets
    22
  • Fret Size
    Jumbo
  • Headstock Thickness
    .540” (13.71 mm)
  • Neck Thickness
    1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
  • Peg Hole Diameter
    .404” (10.26 mm)

Features

  • Maple neck w/ walnut stripe
  • Large '70s headstock
  • Maple fingerboard with 9.5" radius
  • 22 jumbo frets
  • Pre-slotted synthetic bone nut
  • Six two-guide-pin tuning machine holes
American Performer Tele Neck, 22 Jumbo Frets, 9.5" Radius
405.00 €
405.00 €

You May Also Like

Recently Viewed

 

Verified In Stock: DATE