Made in Japan Traditional II 50's Stratocaster® Neck

Model #: 0990502921

  • Back Order
Made in Japan Traditional II 50's Stratocaster® Neck

Fusing Fender's traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Traditional II series necks offer the sought after and iconic feel of Fender MIJ instruments.

Crafted in the same facility as the Made in Japan series instruments, the Traditional II 50’s Stratocaster Neck features a classic “U” shape and incorporates a flatter 9.5" radius and 21 vintage frets on a maple fingerboard. A gloss urethane finish provides classic feel and a slimmer 1-5/8" (41 mm) nut width makes for easy playability.

This replacement neck is for a Fender® or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of


  • Stratocaster neck with walnut stripe
  • 9.5"-radius and “U” shape neck profile
  • Maple fingerboard with 21 vintage frets and white dot inlays
  • Gloss urethane finish
  • Pre-slotted bone nut
  • Neck Shape
    "U" Shape
  • Tuner Mounting Config
    Vintage-Style 2-Screw
  • Fingerboard Material
  • Neck Material
    Maple with Walnut Stripe
  • Nut Material
  • Position Inlays
    Black Dot
  • Neck Finish
    Gloss Urethane
  • Truss Rod Nut
    Vintage-Style Slotted
  • Truss Rod
    Vintage-Style Heel Adjust
  • Fingerboard Radius
    9.5" (241 mm)
  • Scale Length
    25.5" (648 mm)
  • Nut Width
    1.615" (41.02 mm)
  • Number of Frets
  • Fret Size
  • Headstock Thickness
    .540" (13.71 mm)
  • Neck Thickness
    1st Fret - .846” (21.5 mm), 12th Fret - .905” (23.0 mm)
  • Peg Hole Diameter
    9.2 mm