Precision to Jazz Bass Conversion Neck, 20 Med Jumbo Frets, 12" Radius

Model #: 0990302921

Select Guitar Color
Select Guitar Color
EUR 439,00
Availability:
  • In Stock
Precision to Jazz Bass Conversion Neck, 20 Med Jumbo Frets, 12" Radius
EUR 439,00

Increase the speed of your favorite Precision Bass with the P to J Conversion neck. Designed to fit on a Precision Bass body but featuring the profile and nut width of a Jazz Bass neck, this conversion neck will create a bass that has the classic P Bass thump along with the ease of Jazz Bass playability.

Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on our instruments. This Ensenada, Mexico-made P/J Bass conversion neck features a maple or pau ferro fingerboard, a 12" radius and 20 medium jumbo frets. The maple neck has a comfortable modern "C" profile with a smooth satin urethane finish on the front and back of the neck. The headstock has a gloss finish with an authentic Precision Bass decal to complete the classic look.

The synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. For true Fender authenticity, it's also serialized and stamped, with genuine headstock logo decal.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

Features

  • Maple neck with walnut "skunk" stripe
  • Maple or pau ferro fingerboard with 12" radius
  • 20 medium jumbo frets
  • Pre-slotted synthetic bone nut
  • Standard truss rod
  • Four 4-screw mount tuning machine holes
General
  • Neck Shape
    Modern "C"
  • Tuner Mounting Config
    4-Screw Mount
Materials
  • Fingerboard Material
    Maple
  • Neck Material
    Maple
  • Nut Material
    Synthetic Bone
  • Position Inlays
    Black Dot
  • Neck Finish
    Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
  • Truss Rod Nut
    3/16" Hex Adjustment
  • Truss Rod
    Standard
Measurements
  • Fingerboard Radius
    12" (305 mm)
  • Scale Length
    34" (864 mm)
  • Nut Width
    1.5" (38.1 mm)
  • Number of Frets
    20
  • Fret Size
    Medium Jumbo
  • Headstock Thickness
    .540" (13.71 mm)
  • Neck Thickness
    1st Fret - .800" (20.32 mm), 12th Fret - .900" (22.86 mm)
  • Peg Hole Diameter
    .734” (18.64 mm)