Fusing Fender's traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Hybrid II series necks offer the sought after and iconic feel of Fender MIJ instruments.
Crafted in the same facility as the Made in Japan series instruments, the Hybrid II Stratocaster Neck features a modern “C” shape and incorporates a flatter 9.5" radius and 22 narrow tall frets on a rosewood or maple fingerboard. A satin urethane finish provides smooth feel for modern playability.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Fingerboard MaterialMaple
-
Neck MaterialMaple with Walnut Stripe
-
Nut MaterialBone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane with Gloss Urethane Headstock Face
-
Truss Rod Nut5 mm Hex
-
Truss RodStandard
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (648 mm)
-
Nut Width1.650" (42 mm)
-
Number of Frets22
-
Fret SizeNarrow Tall
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .800" (20.4 mm), 12th Fret - .900" (23.4 mm)
-
Peg Hole Diameter9.2 mm
Features
- Stratocaster neck with walnut stripe
- 9.5"-radius and “C” shape neck profile
- Rosewood or maple fingerboard with 22 narrow tall frets
- Satin urethane finish
- Pre-slotted bone nut
Fusing Fender's traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Hybrid II series necks offer the sought after and iconic feel of Fender MIJ instruments.
Crafted in the same facility as the Made in Japan series instruments, the Hybrid II Stratocaster Neck features a modern “C” shape and incorporates a flatter 9.5" radius and 22 narrow tall frets on a rosewood or maple fingerboard. A satin urethane finish provides smooth feel for modern playability.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
-
Neck ShapeModern "C"
-
Tuner Mounting ConfigVintage-Style 2-Screw
-
Fingerboard MaterialMaple
-
Neck MaterialMaple with Walnut Stripe
-
Nut MaterialBone
-
Position InlaysBlack Dot
-
Neck FinishSatin Urethane with Gloss Urethane Headstock Face
-
Truss Rod Nut5 mm Hex
-
Truss RodStandard
-
Fingerboard Radius9.5" (241 mm)
-
Scale Length25.5" (648 mm)
-
Nut Width1.650" (42 mm)
-
Number of Frets22
-
Fret SizeNarrow Tall
-
Headstock Thickness.540" (13.71 mm)
-
Neck Thickness1st Fret - .800" (20.4 mm), 12th Fret - .900" (23.4 mm)
-
Peg Hole Diameter9.2 mm
Features
- Stratocaster neck with walnut stripe
- 9.5"-radius and “C” shape neck profile
- Rosewood or maple fingerboard with 22 narrow tall frets
- Satin urethane finish
- Pre-slotted bone nut