Player Plus Telecaster® Neck, 12" Radius, 22 Medium Jumbo Frets

Model #: 0997333921

Select Guitar Color
Select Guitar Color
€399.00
Availability:
  • In Stock
Player Plus Telecaster® Neck, 12" Radius, 22 Medium Jumbo Frets
€399.00

Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Telecaster® guitar neck features a silky satin Modern "C" shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12" radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.

The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

Features

  • Maple neck with walnut "skunk" stripe
  • Maple or pau ferro fingerboard with 12" radius and 22 medium jumbo frets
  • Satin urethane finish on front and back of neck with gloss headstock front
  • Rolled fingerboard edges
  • Pre-slotted synthetic bone nut
  • Single action, head adjust
  • Six two-guide-pin tuning machine holes
General
  • Neck Shape
    Modern "C"
  • Tuner Mounting Config
    Dual Guide Pin
Materials
  • Fingerboard Material
    Pau Ferro
  • Neck Material
    Maple with Walnut Stripe
  • Nut Material
    Synthetic Bone
  • Position Inlays
    White Dot
  • Neck Finish
    Satin Urethane with Gloss Urethane Headstock Face
  • Truss Rod Nut
    3/16" Hex Adjustment
  • Truss Rod
    Dual-Action Head Adjust
Measurements
  • Fingerboard Radius
    12" (305 mm)
  • Scale Length
    25.5" (64.77 cm)
  • Nut Width
    1.685" (42.8 mm)
  • Number of Frets
    22
  • Fret Size
    Medium Jumbo
  • Headstock Thickness
    .540" (13.71 mm)
  • Neck Thickness
    1st Fret - .820" (20.82 mm), 12th Fret - .870" (22.09 mm)
  • Peg Hole Diameter
    .397" (10.08 mm)