Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Style
    Vintage-Style
  • Neck Shape
    '70s "C"
  • Tuner Mounting Config
    Vintage-Style 4-Screw
  • Other Features
    Each nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
  • Where Used
    Classic Series
  • Fingerboard Material
    Pau Ferro
  • Neck Material
    Maple
  • Nut Material
    Synthetic Bone
  • Position Inlays
    Pearloid Block
  • Neck Finish
    Gloss Urethane
  • Truss Rod Nut
    Bullet Style
  • Truss Rod
    Standard
  • Fingerboard Radius
    7.25" (184.1 mm)
  • Scale Length
    34" (86.36 cm)
  • Nut Width
    1.5" (38.1 mm)
  • Number of Frets
    20
  • Fret Size
    Vintage-Style
  • Headstock Thickness
    .540” (13.71 mm)
  • Neck Thickness
    2nd Fret - .820" (20.82 mm), 12th Fret - .920" (23.36 mm)
  • Peg Hole Diameter
    .625” (15.87 mm)

Features

  • 7.25"-radius pau ferro fingerboard
  • "C"-shaped neck profile
  • 20 medium-jumbo frets; block inlays
  • Pre-slotted synthetic bone nut
  • Gloss urethane finish

Classic Series 70's Jazz Bass® Neck, 20 Medium Jumbo Frets, Block Inlay, Pau Ferro

Model #: 0992003921
£335.00
MORE ON THE WAY
Order now, expected in stock 02/10/24
In stock
Available To Ship
Availability:
  • In Stock

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Style
    Vintage-Style
  • Neck Shape
    '70s "C"
  • Tuner Mounting Config
    Vintage-Style 4-Screw
  • Other Features
    Each nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)
  • Where Used
    Classic Series
  • Fingerboard Material
    Pau Ferro
  • Neck Material
    Maple
  • Nut Material
    Synthetic Bone
  • Position Inlays
    Pearloid Block
  • Neck Finish
    Gloss Urethane
  • Truss Rod Nut
    Bullet Style
  • Truss Rod
    Standard
  • Fingerboard Radius
    7.25" (184.1 mm)
  • Scale Length
    34" (86.36 cm)
  • Nut Width
    1.5" (38.1 mm)
  • Number of Frets
    20
  • Fret Size
    Vintage-Style
  • Headstock Thickness
    .540” (13.71 mm)
  • Neck Thickness
    2nd Fret - .820" (20.82 mm), 12th Fret - .920" (23.36 mm)
  • Peg Hole Diameter
    .625” (15.87 mm)

Features

  • 7.25"-radius pau ferro fingerboard
  • "C"-shaped neck profile
  • 20 medium-jumbo frets; block inlays
  • Pre-slotted synthetic bone nut
  • Gloss urethane finish
Classic Series 70's Jazz Bass® Neck, 20 Medium Jumbo Frets, Block Inlay, Pau Ferro
£335.00
£335.00

You May Also Like

Recently Viewed

 

Verified In Stock: DATE