Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Vintera® II Stratocaster® neck features a "U" shape based on the classic '70s profile and offers a remarkably comfy feel. A 7.25" radius fingerboard with vintage-tall frets provides vintage comfort with ample room for big bends and expressive vibrato. Although this neck features a 3-bolt design typical of '70s Strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies.

The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Neck Shape
    '70s "U"
  • Tuner Mounting Config
    '70s Vintage-Style 2-Screw
  • Fingerboard Material
    Maple
  • Neck Material
    Maple
  • Nut Material
    Synthetic Bone
  • Position Inlays
    Black Dot
  • Neck Finish
    Gloss Urethane
  • Truss Rod Nut
    Bullet Style
  • Truss Rod
    Bullet Style
  • Fingerboard Radius
    7.25" (184.1 mm)
  • Scale Length
    25.5" (64.77 cm)
  • Nut Width
    1.650" (42 mm)
  • Number of Frets
    21
  • Fret Size
    Vintage Tall
  • Headstock Thickness
    .540" (13.71 mm)
  • Neck Thickness
    1st Fret - .835" (21.21 mm), 12th Fret - .900" (22.86 mm)
  • Peg Hole Diameter
    .397" (10.08 mm)

Features

  • Maple neck with ‘70’s “U” Shape
  • Maple fingerboard with 7.25" radius
  • 21 vintage tall frets
  • Pre-slotted synthetic bone nut
  • Bullet truss rod
  • Six tuning machine holes designed to fit 70’s vintage-style two-screw-mount tuning machines

Vintera® II 70’s Stratocaster® Neck, 21 Vintage Tall Frets, Maple, U Shape

Model #: 0999723921
EUR 549,00
Availability:
  • This item is currently not available

Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Vintera® II Stratocaster® neck features a "U" shape based on the classic '70s profile and offers a remarkably comfy feel. A 7.25" radius fingerboard with vintage-tall frets provides vintage comfort with ample room for big bends and expressive vibrato. Although this neck features a 3-bolt design typical of '70s Strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies.

The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Neck Shape
    '70s "U"
  • Tuner Mounting Config
    '70s Vintage-Style 2-Screw
  • Fingerboard Material
    Maple
  • Neck Material
    Maple
  • Nut Material
    Synthetic Bone
  • Position Inlays
    Black Dot
  • Neck Finish
    Gloss Urethane
  • Truss Rod Nut
    Bullet Style
  • Truss Rod
    Bullet Style
  • Fingerboard Radius
    7.25" (184.1 mm)
  • Scale Length
    25.5" (64.77 cm)
  • Nut Width
    1.650" (42 mm)
  • Number of Frets
    21
  • Fret Size
    Vintage Tall
  • Headstock Thickness
    .540" (13.71 mm)
  • Neck Thickness
    1st Fret - .835" (21.21 mm), 12th Fret - .900" (22.86 mm)
  • Peg Hole Diameter
    .397" (10.08 mm)

Features

  • Maple neck with ‘70’s “U” Shape
  • Maple fingerboard with 7.25" radius
  • 21 vintage tall frets
  • Pre-slotted synthetic bone nut
  • Bullet truss rod
  • Six tuning machine holes designed to fit 70’s vintage-style two-screw-mount tuning machines
Vintera® II 70’s Stratocaster® Neck, 21 Vintage Tall Frets, Maple, U Shape
EUR 549,00
EUR 549,00