Add a touch of style to your guitar with a Player Series neck featuring block inlays. For modern playability with a throwback vibe, these necks have all the features of the Players Series instruments but with block inlays that make them stand out in a crowd.

Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on our instruments. This Ensenada, Mexico-made Stratocaster neck features a pau ferro fingerboard with white pearloid block inlays, a 9.5" radius and 22 medium jumbo frets. The maple neck has a comfortable Modern C neck profile that is comfortable for almost any playing style.

The synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. For true Fender authenticity, it's also serialized and stamped, with genuine headstock spaghetti logo decal.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Style
    Modern
  • Neck Shape
    Modern "C"
  • Tuner Mounting Config
    Dual Guide Pin
  • Fingerboard Material
    Pau Ferro
  • Neck Material
    Maple with Walnut Stripe
  • Nut Material
    Sattel aus synthetischem Knochen
  • Position Inlays
    Weißer Perloid-Block
  • Neck Finish
    Satin Urethane with Gloss Urethane Headstock Face
  • Truss Rod Nut
    3/16" Hex Adjustment
  • Truss Rod
    Single Action, Head Adjust
  • Fingerboard Radius
    9.5" (241 mm)
  • Scale Length
    25.5" (64.77 cm)
  • Nut Width
    1.650" (42 mm)
  • Number of Frets
    22
  • Fret Size
    Medium Jumbo
  • Headstock Thickness
    .540” (13.71 mm)
  • Neck Thickness
    1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
  • Peg Hole Diameter
    .397" (10.08 mm)

Features

  • Maple fingerboard with white pearloid block inlays
  • 9.5" radius with 22 medium jumbo frets
  • Modern C neck profile
  • Satin urethane finish on back, gloss urethane on headstock face
  • Pre-slotted synthetic bone nut
  • Six two-guide-pin tuning machine holes

Player Series Stratocaster® Neck w/Block Inlays, 22 Medium Jumbo Frets, Pau Ferro

Modell Nr. 0994553921
€ 429.00
Availability:
  • In Stock

Add a touch of style to your guitar with a Player Series neck featuring block inlays. For modern playability with a throwback vibe, these necks have all the features of the Players Series instruments but with block inlays that make them stand out in a crowd.

Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on our instruments. This Ensenada, Mexico-made Stratocaster neck features a pau ferro fingerboard with white pearloid block inlays, a 9.5" radius and 22 medium jumbo frets. The maple neck has a comfortable Modern C neck profile that is comfortable for almost any playing style.

The synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. For true Fender authenticity, it's also serialized and stamped, with genuine headstock spaghetti logo decal.

This replacement neck is for a Fender or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the "Support" section of fender.com.

  • Style
    Modern
  • Neck Shape
    Modern "C"
  • Tuner Mounting Config
    Dual Guide Pin
  • Fingerboard Material
    Pau Ferro
  • Neck Material
    Maple with Walnut Stripe
  • Nut Material
    Sattel aus synthetischem Knochen
  • Position Inlays
    Weißer Perloid-Block
  • Neck Finish
    Satin Urethane with Gloss Urethane Headstock Face
  • Truss Rod Nut
    3/16" Hex Adjustment
  • Truss Rod
    Single Action, Head Adjust
  • Fingerboard Radius
    9.5" (241 mm)
  • Scale Length
    25.5" (64.77 cm)
  • Nut Width
    1.650" (42 mm)
  • Number of Frets
    22
  • Fret Size
    Medium Jumbo
  • Headstock Thickness
    .540” (13.71 mm)
  • Neck Thickness
    1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
  • Peg Hole Diameter
    .397" (10.08 mm)

Features

  • Maple fingerboard with white pearloid block inlays
  • 9.5" radius with 22 medium jumbo frets
  • Modern C neck profile
  • Satin urethane finish on back, gloss urethane on headstock face
  • Pre-slotted synthetic bone nut
  • Six two-guide-pin tuning machine holes
Player Series Stratocaster® Neck w/Block Inlays, 22 Medium Jumbo Frets, Pau Ferro
€ 429.00
€ 429.00