BASSMAN 100T
- Pro-level 100-watt tube head with dual-channel design (vintage, overdrive).
- Automatic Bias monitors and re-biases tubes.
BASSMAN 100T
With the Bassman® 100T you get a main speaker output and an extension speaker output to power a second cabinet. The speaker impedance switch sets the amp to match the performance of the cabinets being used, from 8 Ohms down to 2 Ohms.
Selecting the correct impedance allows the amplifier to deliver the full 100w into either 2, 4 or 8Ohm loads. The output power has 3 selectable options including full power of 100w, quarter power of 25w and Silent Record which stays in 25w mode but mutes the speaker output. When in Silent Record, the signal is picked up after the power amp, so you can get all of the power amp mojo straight out of the XLR mic output.
BASSMAN 100T
The Auto Bias circuit removes tube anxiety by monitoring the bias of your power tubes and making adjustments to keep your amp properly biased and running smoothly.
Using the Adjust up and down arrows runs the amp hotter or cooler, which results in a slightly different feel and tonality. Hotter settings wear on the tubes harder than cool settings.
