Saving Presets on the Fender® Mustang™ and Fender® Bronco™ 40 Amplifiers
Fender® Mustang™ Series and Fender® Bronco™ 40 amps give you the power to edit and save Presets. Every adjustment you make to a Preset including Gain, Volume, EQ, Effects, Mod, Dly/Rev and FX/Comp can be saved and recalled. Whenever you change a setting on your amp, the Save light will illuminate. If you want to keep the changes you have made to that specific Preset, you will need to save it.
To save a Preset, press the Save button. The Save and Exit buttons will flash rapidly. You can press the Exit button at this point to cancel the Save function. Turn the Preset knob (the black encoder Knob in Fender® Mustang™ III, IV, and V models) to select a Preset to overwrite and press Save again to save the Preset.
NOTE: With the Mustang I/II, Mustang Mini and Bronco 40 amps, you can only overwrite to the Red and Green banks. If you're attempting to overwrite an Amber Preset, you will need to select either the Red or Green bank location to save to. Amber Presets can only be overwritten using Fender FUSE software.