Fender® G-DEC® 3 Firmware Download (v1.04)

View products this article applies to ...

Updating the firmware on the Fender® G-DEC® 3.
Check the Software & Firmware Downloads section of the Fender G-DEC 3 support site and download the latest firmware update for your Fender G-DEC 3.
There are two ways to update the firmware, either through Fender® FUSE™ or from the Fender G-DEC 3 unit itself. 
Updating the firmware through Fender FUSE:
  1. Download the file containing the latest Fender G-DEC 3 firmware here.
  2. Open Fender FUSE and choose Utilities -> Update Firmware.
  3. Select the firmware file.
  4. Check your Fender G-DEC 3’s screen for update progress.
Updating the firmware from the Fender G-DEC 3 front panel:
  1. Download the file containing the latest Fender G-DEC 3 firmware here.
  2. Copy the file to an SD card.
  3. With the Fender G-DEC 3 powered offinsert the SD card into the unit.
  4. Power the unit on and follow the on-screen instructions.
If a firmware update didn't resolve the issue, please contact Fender Consumer Relations.

 

NOTE: Restoring the amps firmware will have no impact on Presets or media content stored in the amp. The firmware restore process takes approximately 15-20 seconds.